Clear Base is a clear, curable extender base plastisol. This product is formulated to soften, extend and increase flow characteristics of most plastisol inks. May also be used as a top coat clear or added to any plastisol ink as an extender, however, extending...

CURABLE REDUCER is an efficient reducer and an addition of 5% by weight will lower the viscosity of most plastisol inks by 25%. Adding curable reducer at recommended amounts will not alter the cure temperature of the plastisol ink. Additions greater than 10% may...

Foil Resist Additive can be mixed with most standard plastisols to make the ink resist foil during application of the foil in a heat press.  Tech Sheet Download Plastisol MSDS - ANSI Plastisol MSDS Additive Plastisol MSDS Section 16 Reducer

When mixed with glitter flakes, Hex Base penetrates the fabric, leaving the flake exposed and dry. Tech Sheet Download Plastisol MSDS - ANSI Plastisol MSDS Additive Plastisol MSDS Section 16 Reducer

Mix with plastisol pigments. Used for raised prints and texture effects. Tech Sheet Download Plastisol MSDS - ANSI Plastisol MSDS Additive Plastisol MSDS Section 16 Reducer

Mix with plastisol pigments. Used for raised prints and texture effects. Tech Sheet Download Plastisol MSDS - ANSI Plastisol MSDS Additive Plastisol MSDS Section 16 Reducer

MP Plus Base is a press-ready plastisol base for mixing colors using plastisol color pigments and printing on 100% Cotton or over a low bleed underlay when printing on poly/cotton blends. Tech Sheet Download Plastisol MSDS - ANSI Plastisol MSDS Additive Plastisol MSDS Section 16...

Ink additive. Bonding Agent Catalyst mixed in to properly bond to nylon materials. Mix 5 to 15% by weight. Only mix what is needed as the ink will harden after 2-3 hours. Tech Sheet Download Plastisol MSDS - ANSIPlastisol MSDS AdditivePlastisol MSDS Section 16Reducer...

Plastisol base formulated to be mixed with plastisol pigments to produce a raised or puff effect. Tech Sheet Download Plastisol MSDS - ANSI Plastisol MSDS Additive Plastisol MSDS Section 16 Reducer

*** This item can only ship UPS Ground due to item being a Hazardous Material.** Puff Additive to add texture and interest to a design. The ink will puff up when it is cured. Different mesh sizes or higher temperatures will create unique looks....

Reducer will reduce tackiness and viscosity. It also will reduce “ink hang” in the screen while maintaining opacity if used properly. Use 1% - 3% by weight. Note: Over-use of Reducer can cause resin swelling and affect ink opacity, printability and cure. Tech Sheet Download...

Soft-Hand: Good for thinning, reducing viscosity, extending and a soft-hand feel. Safe to use because it is a balanced mixture that can be heat-cured at normal plastisol temperatures (300°F - 330°F). Increases ink penetration and elongation. Tech Sheet Download Plastisol MSDS - ANSI Plastisol...

Stretch Base can be easily mixed into plastisol ink to produce increased elongation. Tech Sheet Download Plastisol MSDS - ANSI Plastisol MSDS Additive Plastisol MSDS Section 16 Reducer

NPT BARRIER BASE ES0266 NPT Barrier Base is being offered as a high opaque, low bleed under base that has been formulated for maximum opacity and excellent bleed resistance on 100% Polyester. Test of this product has been very successful on various fabrics to...

INFINITE QUICK FLASH ADDITIVE K2926 is mixed into a plastisol at up to 10% by weight to speed up the flash cure time of the ink. Make sure to mix thoroughly. Ink will become thicker with more powder additive. Statement: Rutland Plastic Technologies does...

*** This item can only ship UPS Ground due to item being a Hazardous Material.** NPT THICKENER #10 Add up to 1% by weight to thicken a plastisol. Thicker plastisol inks will print with more opacity. Make sure to stir properly to insure a...